Toshiba E-Studio 5540c - Main Charger Ozone Exhaust Fan-K;-C;-M;-Y

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 105
4.6.18 Main charger ozone exhaust fan-K/-C/-M/-Y (F17/F1/F19/F20)
(3) Disconnect 1 connector and release 3
latches and then take off the auger lock
detection sensor.
Fig. 4-305
(1) Take off the EPU cover.
 P. 4-101"4.6.13 EPU cover"
(2) Release 2 latches and take off the waste
toner duct.
Fig. 4-306
(3) Disconnect 1 connector and then take off the
main charger ozone exhaust fan by sliding it.
Notes:
Do not mix the duct of the fan for Y color with
others because its form differs from that of
others.
Fig. 4-307
Auger lock detection sensor
Waste toner duct
Main charger ozone exhaust fan