4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 87
4.5.57 End fence home position sensor (S112)
(1) Pull out the standby unit, and slide the
standby tray to the feeding side.
Fig. 4-254
(2) Remove 1 screw, and then take off the
sensor cover.
Fig. 4-255
(3) Disconnect 1 connector and release 3
latches. Then take off the end fence home
position sensor.
Fig. 4-256
End fence home position sensor
To Next Page
Loading...
