Toshiba E-Studio 5540c - Bypass Pickup Roller

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 47
4.5.5 Bypass pickup roller
(3) Disconnect 1 connector and release 3
latches. Then take off the bypass paper
sensor.
Fig. 4-132
(1) Remove 2 screws and then take off the SFB
upper cover.
Fig. 4-133
(2) Remove 1 clip and pull out the shaft. Then
take off the bypass pickup roller.
Fig. 4-134
Bypass paper sensor
SFB upper cover
Bypass pickup roller