Toshiba E-Studio 5540c - Exposure Lamp Cooling Fan-2

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 22
4.3.8 Exposure lamp cooling fan-2 (F26)
(4) Disconnect 1 connector and take off the
scanner unit cooling fan-1.
Fig. 4-60
(1) Open the RADF.
(2) Take off the original glass.
 P. 4-15"4.3.1 Original glass"
(3) Move the carriage-1 to the right side.
Fig. 4-61
Notes:
Rotate the drive pulley to move the carriage.
Fig. 4-62
Scanner unit
cooling fan-1
Drive pulley