Toshiba E-Studio 5540c - Exposure Lamp

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 18
4.3.5 Exposure lamp (EXP)
(4) Disconnect 1 connector each, release 2
latches each and take off 3 APS sensors.
Fig. 4-48
(1) Take off the original glass.
 P. 4-15"4.3.1 Original glass"
(2) Take off the top front cover.
 P. 4-2"4.1.5 Top front cover"
(3) Move the carriage-1 to the center position.
Fig. 4-49
Notes:
Rotate the drive pulley to move the carriage.
Fig. 4-50
Latch
Drive pulley