4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 219
4.10.16 Bridge unit upper cover
(1) Take off the bridge unit.
P. 4-213"4.10.11 Bridge unit"
(2) Remove 1 screw and the ground wire.
(3) Disconnect the relay connector and then
release the harness and the ground wire
from 2 clamps.
Fig. 4-635
(4) Remove 1 screw and then release the
stopper.
Fig. 4-636
(5) Remove the clip and then take off the bridge
unit upper cover by sliding it.
Fig. 4-637
To Next Page
Loading...
