e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 218
(4) Disconnect 2 connectors and then release
the harness from 2 clamps.
Fig. 4-632
(5) Remove 4 screws and then take off the
motor bracket.
(6) Disconnect 1 connector.
Fig. 4-633
(7) Remove 2 screws and then take off the
bridge unit transport exit motor, gear and belt
Fig. 4-634
Bridge unit transport exit motor
To Next Page
Loading...
