Toshiba E-Studio 5540c - Original Reverse Tray; Platen Sheet Unit

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 261
4.11.7 Original reverse tray
4.11.8 Platen sheet unit
(4) Take off the original tray.
Fig. 4-759
(1) Remove the original tray.
 P. 4-260"4.11.6 Original tray"
(2) Remove 1 screw and take off the original
reverse tray.
Fig. 4-760
(1) Open the RADF. Remove 5 screws and take
off the platen sheet unit.
Notes:
• Do not scratch or bend the platen sheet.
Avoid adhesion of dust, dirt or foreign
matter, especially things that may
damage to the surface of the platen
sheet.
• When installing the platen sheet unit, be
sure to perform the platen sheet
adjustment. P. 6-129"6.12.9 Platen
Sheet"
Fig. 4-761