Toshiba E-Studio 5540c - V0 Sensor Shutter Solenoid (K) (SOL)

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 107
4.6.21 V0 sensor shutter solenoid (K) (SOL) (e-STUDIO6550C/6570C
only)
(5) Remove 2 gears.
Fig. 4-311
(6) Release 1 lock and then take off the needle
electrode cleaner motor.
Notes:
When installing the motor, engage the
locking part with the recessed part of the
motor.
Fig. 4-312
(1) Take off the EPU cover
 P. 4-101"4.6.13 EPU cover"
(2) Disconnect 3 connectors.
Fig. 4-313
Gear
Needle electrode cleaner motor