Toshiba E-Studio 5540c - Exit Intermediate Roller

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 277
4.11.22 Exit intermediate roller
(1) Take off the exit/reverse guide.
 P. 4-264"4.11.11 Exit guide / Exit/reverse
guide / Reading end guide"
(2) Remove 2 screws and take off the guide.
Fig. 4-808
(3) Remove 1 E-ring, 1 pulley, 1 pin and 1
bushing.
Fig. 4-809
(4) Remove 1 E-ring and 1 bushing and take off
the exit intermediate roller.
Fig. 4-810
Bushing
Pulley
Pin
E-ring
Bushing
Exit intermediate roller
E-ring