e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 278
4.11.23 Reverse roller
(1) Take off the assembly of the exit guide and
the exit/reverse guide.
P. 4-264"4.11.11 Exit guide / Exit/reverse
guide / Reading end guide"
(2) Remove 2 screws and take off the 2 leaf
springs.
Fig. 4-811
(3) Remove 3 screws and take off the upper
reverse guide.
Fig. 4-812
(4) Take off the original feed motor bracket with
the motor.
P. 4-280"4.11.25 Original feed motor
bracket"
(5) Remove 1 clip, 1 pulley, 1 pin and 1 bushing.
Fig. 4-813
To Next Page
Loading...
