Toshiba E-Studio 5540c - Drive of Rollers

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
3 - 74
3.11.4 Description of Operation
[ 1 ] Drive of rollers
The drive of each motor in the paper feeding area activates the paper transfer roller as follows.
Fig. 3-43
Feed/transport motor
(
M43
)
3rd drawer transport clutch
(
CLT4
)
4th drawer transport clutch
(
CLT6
)
3rd drawer feed clutch
(
CLT5
)
4th drawer feed clutch
(
CLT7
)
3rd drawer transport roller
4th drawer transport roller
3rd drawer feed roller
3rd drawer pickup roller
4th drawer feed roller
4th drawer pickup roller
Registration motor
(
M39
)
Bypass feed roller
Bypass pickup roller
Tray-up motor-1
(
M44
)
Trays in 1st/2nd drawer
Registration roller
Transport motor-1
(
M40
)
1st drawer transport roller
2nd drawer transport roller
1st drawer feed roller
1st drawer pickup roller
Transport motor-2
(
M41
)
Feed motor
(
M42
)
2nd drawer feed roller
2nd drawer pickup roller
Bypass pickup motor
(
M12
)
Tray-up motor-2
(
M45
)
Trays in 3rd/4th drawer
Normal rotation
Reverse rotation
Rear view
Feed motor(M42)
3rd drawer transport clutch
(CLT4)
3rd drawer feed clutch (CLT5)
4th drawer transport clutch
(CLT6)
4th drawer feed clutch
(CLT7)
Registration motor (M39)
Transport motor-2(M41)
Registration roller (rubber)
Transport roller
Registration roller(Metal)
Tray-up motor-2
(M45)
Feed/transport motor (M43)
Tray-up motor-1
(M44)
Transport motor-1(M40)
Feed/transport drive unit
Feed/transport unit
Transport roller