Toshiba E-Studio 5540c - Bypass Motor

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 50
4.5.9 Bypass motor(M12)
(1) Take off the bypass feed unit.
 P. 4-45"4.5.2 Bypass feed unit"
(2) Remove 1 belt, 1 E-ring, 1 pulley and 1
bushing.
Fig. 4-141
(3) Remove 1 screw and the grounding wire.
Fig. 4-142
(4) Remove 4 screws and a bracket.
Fig. 4-143
Bushing
Belt
Pulley
Ground wire
Bracket