Toshiba E-Studio 5540c - Fuser Transport Sensor

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 250
4.10.48 Fuser transport sensor (S65)
(4) Remove the duplexing unit path exit sensor
from the sensor bracket.
Fig. 4-728
(1) Pull out the duplexing unit.
(2) Remove 3 screws and take off transport
guide.
Fig. 4-729
(3) Remove 1 screw and take off the sensor
bracket.
(4) Disconnect the connector from the fuser
transport sensor.
Fig. 4-730
Duplexing unit path exit sensor
Shoulder screw
Transport guide
Sensor bracket