Toshiba E-Studio 5540c - Bypass Tray Unit (Removing Tray Arm); Duplexing Unit Front Cover; Duplexing Unit Rear Cover

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 5
4.1.12 Bypass tray unit (Removing tray arm)
4.1.13 Duplexing unit front cover
4.1.14 Duplexing unit rear cover
(1) Secure the sliding section of the tray arm,
and then remove the tray arm by pulling its
joint up.
The tray can be easily taken out by lifting up
its leading edge with the sliding section
secured.
Fig. 4-12
(1) Open the duplexing unit.
(2) Remove the tray arms.
 P. 4-5"4.1.12 Bypass tray unit (Removing
tray arm)"
(3) Remove 3 screws and take off the duplexing
unit front cover.
Fig. 4-13
(1) Open the duplexing unit.
(2) Remove the tray arms.
 P. 4-5"4.1.12 Bypass tray unit (Removing
tray arm)"
(3) Remove 3 screws and take off the duplexing
unit rear cover.
Fig. 4-14
Tray arm
Secure here
Joint