Toshiba E-Studio 5540c - Tandem LCF Feeding Unit; Stopper Opening;Closing Solenoid; Stopper Opening;Closing Detection Sensor

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 82
4.5.52 Tandem LCF feeding unit
4.5.53 Stopper opening/closing solenoid (front) (SOL10)/Stopper
opening/closing detection sensor (front) (S110)
(1) Take off the tandem LCF standby unit.
 P. 4-81"4.5.51 Tandem LCF standby unit"
(2) Remove 3 screws, and then take off the
tandem LCF feeding unit.
Fig. 4-239
(1) Take off the tandem LCF feeding unit.
 P. 4-82"4.5.52 Tandem LCF feeding unit"
(2) Remove 4 screws, and then take off the
feeding unit front cover.
Fig. 4-240
(3) Remove 2 screws, release 2 hooks and then
take off the stopper unit.
Notes:
The position of the hook differs depending on
the destination.
Fig. 4-241
Tandem LCF feeding unit
Feeding unit front cover
Stopper unit