e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 290
(3) Remove 1 screw and take off the switch
bracket.
Notes:
Before taking off the switch, read the scale.
When reinstalling, align it with the
corresponding position on the scale.
Fig. 4-845
(4) Remove 1 screw and take off the RADF
opening/closing switch.
Fig. 4-846
Notes:
Be sure to install the switch so that the arm
comes to the upper side of the switch.
Fig. 4-847
To Next Page
Loading...
