10
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
REMOTE SERVICE
10 - 19
[ 2 ] Setting procedure
(1) Press the [USER FUNCTIONS] button to enter the user function screen.
(2) Press the [ADMIN] tab.
• When the Administrator Password has been set, ADMINISTRATOR PASSWORD screen is
displayed.
Fig.10-18
(3) Press the [PASSWORD] button and the screen is switched to a full keyboard. Then key in the
Administrator Password and press the [OK] button.
* Confirm the password to the administrator.
Fig.10-19
(4) Press the [SERVICE] button in the ADMIN screen.
To Next Page
Loading...
