11
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
FIRMWARE UPDATING
11 - 13
(4) Press the [ON/OFF] button while holding down the [4] and [9] buttons simultaneously.
Data in the USB device are checked and its status is displayed on the screen.
(5) Enter the password, and then press [OK].
(If the Enter Password field is blank, it is unnecessary to enter anything.)
Fig.11-10
The screen for selecting items to be updated is displayed after approx. 1 minute.
On this screen, the current firmware version of this equipment and the firmware version of data to
be updated are displayed.
Fig.11-11
Enter Password
! “ # $ % & ‘ ( ) = ~ | ` { }
* < > ? _ . ^ @ + [ ] ; : / 1
Q W E R T Y U I O P 2 3
A S D F G H J K L 4 5 6
Z X C V B N M , . 7 8 9
Caps Space Backspace
Ok Reset
To Next Page
Loading...
