11
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
FIRMWARE UPDATING
11 - 49
(5) Remove the internal cover.
Fig.11-42
(6) Remove the cover plate.
Fig.11-43
(7) Connect the download jig with the jig connector on the FAX board.
Fig.11-44
(8) Press the [ON/OFF] button while simultaneously holding down the [0] and [8] buttons.
Updating starts automatically and the LED on the download jig lights.
To Next Page
Loading...
