3
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
OUTLINE OF THE MACHINE
3 - 89
3.13.2 Composition
Transfer belt unit Transfer belt
1st transfer roller Y, M, C, K
Cleaning facing roller
Tension roller
2nd transfer facing roller
Lift roller
Idling roller
Transfer belt cam motor M14
Transfer belt contact/release detection sensor S46
2nd transfer facing roller cleaning pad PM parts
Cleaning facing roller cleaning pad
Transfer belt cleaning Transfer belt cleaning blade PM parts
Transfer belt cleaner side seal PM parts
Transfer belt motor M13
2nd transfer unit 2nd transfer roller PM parts
2nd transfer roller lubricant unit PM parts
TRU waste toner box
TRU waste toner amount detection sensor S17
2nd transfer side paper clinging detection
sensor
S51
Image position aligning sensor
(front /center/rear)
S20 / S21/S22
2nd transfer roller contact/release
detection sensor
S50
Image quality sensor S23
2nd transfer cam motor M48
To Next Page
Loading...
