3
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
OUTLINE OF THE MACHINE
3 - 109
3.16.2 Composition
Paper exit unit Upper paper exit sensor (S61)
Upper exit tray paper full detection sensor (S62)
Lower paper exit sensor (S63)
Reverse section stationary jam detection sensor (S60)
Reverse path cover switch (SW5)
Upper paper exit roller
Lower paper exit roller
Upper exit section cooling fan-1 (F32)
Upper exit section cooling fan-2 (F33)
Lower exit section cooling fan-1 (F34)
Lower exit section cooling fan-2 (F35)
Lower exit section cooling fan-3 (F36)
Exit motor (M2)
Bridge unit Bridge unit path entrance sensor (S55)
Bridge unit path exit sensor (S56)
Reverse section stationary jam detection sensor (S58)
Reverse sensor (S59)
Interlock switch (SW2)
Bridge unit connecting detection switch (SW8)
Front cover opening/ closing detection switch (SW9)
Transport path switching solenoid-1 (SOL1)
Transport path switching solenoid-2 (SOL2)
Exit paper cooling fan (front) (F5)
Bridge unit cooling fan (front) (F6)
Bridge unit cooling fan (rear) (F7)
Bridge unit transport roller-1
Bridge unit transport roller-2
Bridge unit transport roller-3
Reverse roller
Bridge unit exit roller-1
Bridge unit exit roller-2
Bridge unit transport entrance motor (M4)
Bridge unit transport exit motor (M5)
Reverse motor (M3)
Duplexing bridge unit Duplexing unit opening/ closing detection sensor (S64)
Reverse path sensor (S57)
Duplexing bridge transport roller
Duplexing unit Duplexing unit path entrance sensor (S66)
Duplexing unit path exit sensor (S67)
Duplexing unit interlock switch (SW4)
Duplexing unit cover opening/ closing detection sensor (SW7)
ADU board (ADU)
Reversed paper cooling fan (F11)
ADU transport roller-1
ADU transport roller-2
ADU transport roller-3
ADU motor-1 (M7)
ADU motor-2 (M8)
Fuser transport sensor (S65)
To Next Page
Loading...
