e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
3 - 126
+24VD3 PFC board Exit motor M2 F203:
8 A (Semi time-lag)
Reverse motor M3
Bridge unit transport entrance motor M4
Bridge unit transport exit motor M5
ADU motor-1 M7
ADU motor-2 M8
TRU waste toner motor M10
TRU waste toner transport motor M11
Bypass motor M12
Transfer belt motor M13
Registration motor M39
Transport motor-1 M40
Transport motor-2 M41
Feed motor M42
Feed/transport motor M43
Tray-up motor-2 M45
Tandem LCF tray-up motor M46
Tandem LCF end fence motor M47
Transport path switching solenoid-1 SOL1
Transport path switching solenoid-2 SOL2
Bypass pickup solenoid SOL8
Exit paper cooling fan (front) F5
Bridge unit cooling fan (front) F6
Reversed paper cooling fan F11
Upper exit section cooling fan-1 F32
Upper exit section cooling fan-2 F33
Lower exit section cooling fan-1 F34
Lower exit section cooling fan-2 F35
+24VD4 Finisher F204:
8 A (Semi time-lag)
+24VD5 SLG board F205:
8 A (Semi time-lag)
RADF
+5VB LGC board F210:
5 A (Semi time-lag)
+5VS SYS board,
Control panel
F211:
2.5 A (PolySwitch)
Voltage Board/Unit Part Fuse type
To Next Page
Loading...
