4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 53
(3) Remove 4 screws and take off the SFB lower
unit.
Fig. 4-150
(4) Disconnect 1 connector, remove 2 screws
and take off the SFB lower guide.
Fig. 4-151
(5) Remove 2 screws and take off the SFB lower
guide.
Notes:
Make sure not to damage the latch of the
holder.
Fig. 4-152
To Next Page
Loading...
