4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 111
(6) Release 1 lock to set up a stay.
Notes:
Hold the upper side of the stay. Avoid
touching its shutter.
Fig. 4-324
(7) Release 1 hook and take off the duct.
Fig. 4-325
(8) Pull out the developer unit slightly toward
you, and then take off the developer unit by
holding its rear side up.
Notes:
1. When installing or taking off the developer
unit, be careful not to hit the unit to the
surrounding parts, especially to a sensor
at the bottom of the EPU tray.
2. Never turn the 2 couplings behind the
developer unit in a direction opposite to
the one shown with the arrow.
Fig. 4-326
Fig. 4-327
Coupling (for Mixer)
Coupling
(for Developer sleeve)
To Next Page
Loading...
