4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 155
(4) Remove 1 clip and 1 bushing.
Fig. 4-453
(5) Take off the 2nd transfer unit [1] not to hit the
unit to the registration roller or other parts.
Fig. 4-454
Notes:
When installing, make sure that 2 pins [1] on
the rear side are inserted to the rectangular
holes of the 2nd transfer unit.
Fig. 4-455
To Next Page
Loading...
