e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 234
(4) Remove 4 screws and then take off the fan
cover.
Fig. 4-679
(5) Remove 1 screw and then take off the duct.
(6) Release the harness from the clamp and
then disconnect the connector.
Fig. 4-680
(7) Remove 2 screws and then take off the
bracket.
(8) Release the latch, open the duct and take off
the exit paper cooling fan (front).
Fig. 4-681
Exit paper
cooling fan (front)
Bracket
To Next Page
Loading...
