Toshiba E-Studio 5540c - Page 439

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 265
(8) Remove 2 screws.
Fig. 4-771
(9) Take off the unit of exit guide and exit/
reverse guide.
Fig. 4-772
(10) Disconnect 2 connectors, remove 2 screws
and take off the reading end guide.
Fig. 4-773
(11) Remove 1 E-ring, 1 pulley, 1 pin, 1 timing
belt, 1 guide bushing and the bracket.
Fig. 4-774
Exit guide
Exit/reverse guide
Reading end guide
E-ringPulleyPin
Timing belt
Guide bushing
Bracket