5
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SELF-DIAGNOSTIC MODE
5 - 63
5.16.5 Operation procedure
1. Start up with the Setting Mode (08).
2. Install a USB storage device, in which setting files are stored in the root, in the MFP.
3. Key in [3673] and then press the [START] button.
4. Press [EXECUTION].
5. Setting for all codes included in the setting file are completed, the BASIC screen of the 08 mode
appears.
6. Remove the USB storage device.
To Next Page
Loading...
