Toshiba E-Studio 5540c - Page 655

6
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SETTING ADJUSTMENT
6 - 107
Gap to be confirmed
Fig.6-73
[1] Heat pipe roller
[2] Fuser belt
[3] Fuser roller
[4] Separation plate gap confirmation jig
[5] Separation plate
Gap confirmation jig
• Separation plate gap confirmation jig (JIG-FU-SEP-BP)
Fig.6-74
[1]
[2]
[3]
[4]
Side: 0.5 - 0.8 mm
Center: 0.7 - 1.0 mm
[5]
0.5mm
0.8mm
1.0mm
0.7mm