8
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8 - 97
[EAB1] Short paper jam in Saddle Stitch Finisher
No. 2 paper sensor (PI19) • Sensor check
• Connector check
• Harness check
No. 3 paper sensor (PI20) • Sensor check
• Connector check
• Harness check
Delivery sensor (PI11) • Sensor check
• Connector check
• Harness check
Saddle stitcher controller board • Connector check(J9, J10)
• Board check
Replace parts Remarks
No. 1 paper sensor (PI18)
No. 2 paper sensor (PI19)
No. 3 paper sensor (PI20)
Delivery sensor (PI11)
Saddle stitcher controller board
Classification Error item
Finisher jam
(Saddle stitcher section)
Short paper jam in Saddle Stitch Finisher
[MJ-1104]
Check item Measures
Finisher, saddle stitcher • Check if there is any paper in the finisher, saddle stitcher
or the on the transport path of the equipment. Remove it if
there is.
• Use paper accepted in the specifications.
Feeding sensor (S22) • Sensor check
• Connector check
• Harness check
Junction box paper detection sensor
(S26)
• Sensor check
• Connector check
• Harness check
Transport path-2 (S27) • Sensor check
• Connector check
• Harness check
Transport path-3 (S28) • Sensor check
• Connector check
• Harness check
Ejecting roller (S29) • Sensor check
• Connector check
• Harness check
Interface PC board (I/F) • Connector check(CN8)
• Board check
Saddle stitcher controller board • Connector check(CN20)
• Board check
Finisher controller board • Connector check
• Board check
Check item Measures
To Next Page
Loading...
