e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE and TROUBLESHOOTING
8 - 222
[2BB1] Power failure
[2BD0] Power failure occurred during restoring of Electronic Filing
[2BE0] Machine parameter reading error
[2BF0] Exceeding maximum number of pages
[2BF1] Exceeding maximum number of documents
Classification Error item
Electronic Filing related error
Check item Measures
Setting • Check if the power cable is connected properly and it is
inserted securely.
• Check if the power voltage is unstable.
Replace parts Remarks
Classification Error item
Electronic Filing related error
Check item Measures
Setting • Turn the power OFF and then back ON. Perform the job in
error again.
Replace parts Remarks
Classification Error item
Electronic Filing related error
Check item Measures
Setting • Reduce the number of inserting pages and perform the job
again.
Replace parts Remarks
Classification Error item
Electronic Filing related error
Check item Measures
Setting • Backup the documents in the box or folder to PC or delete
them.
To Next Page
Loading...
