Setting
RFID channels — overview of commands
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 110
Command Command code possible for
hex. dec. HF
compact
HF
extended
HF
bus mode
UHF
compact
UHF
extended
Write AFI to HF tag 0x0091 145 x x x - -
Lock AFI in HF tag 0x0092 146 x x x - -
Read DSFID from HF tag 0x0094 148 x x x - -
Write DSFID to HF tag 0x0095 149 x x x - -
Lock DSFID in HF tag 0x0096 150 x x x - -
Set read/write head password 0x0100 256 x** x** x** x x
Reset read/write head password 0x0101 257 x** x** x** x x
Set tag password 0x0102 258 x** x** x** x x
Set tag password with loop counter 0x2102 8450 x** x** x** x x
Set tag protection 0x0103 259 x** x** x** x x
Set tag protection with loop counter 0x2103 8451 x** x** x** x x
Get HF tag protection status 0x0104 260 x** x** x** x x
Set perma lock 0x0105 261 x x x x x
Set permanent lock with loop
counter
0x2105 8453 x x x x x
Kill UHF tag 0x0200 512 – – – x x
Kill UHF tag with loop counter 0x2200 8704 – – – x x
Restore settings UHF read/write head 0x1000 4096 – – – x x
Backup settings UHF read/write head 0x1001 4097 – – – x x
Reset 0x8000 32768 x x x x x
* With automatic tag type detection Continuous Mode only supports the Inventory command.
** The command is only supported by the chip types EM42 and NXP SLIX2 tags.
*** The command is supported in HF Continuous bus mode.
To Next Page
Loading...