Commissioning
Connecting the device to a Modbus master with CODESYS
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 38
7.2.1 Connecting the device with the controller
To connect the device to the controller, the following components must first be added in
CODESYS:
n Ethernet adapter
n Modbus TCP master
n Modbus TCP slave
Adding an Ethernet adapter
Right-click Device (TX507-P3CV01) in the project tree.
Fig.35: Project tree
To Next Page
Loading...