turck TBEN-RFID Series User Manual

Operation
Reading error codes
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 250
9.17 Reading error codes
The error codes are part of the process input data.
Error code (hex.) Error code (dec.) Meaning
0x8000 32768 Channel not active
0x8001 32769 Read/write head not connected
0x8002 32770 Memory full
0x8003 32771 Block size of the tag not supported
0x8004 32772 Length exceeds the size of the read fragment
0x8005 32773 Length larger than the size of the write fragment
0x8006 37774 Read/write head does not support HF bus mode
0x8007 32775 Only one read/write head should be connected for addressing.
0x8008 32776 Fragmentation must always start with write fragment No. 1
0x8009 32777 Fragmentation incomplete. Write fragment No. > 0 expected
0x8100 33024 Parameter undefined
0x8101 33025
Operation mode parameter outside of the permissible range
0x8102 33026
Tag type parameter outside of the permissible range
0x8103 33027
Operation mode parameter in Continuous Mode outside of the
permissible range
0x8104 33028
Length parameter in Continuous Mode outside of the permissible range
0x8105 33029 Size of the write fragment outside of the permissible range
0x8106 33030 Size of the read fragment outside of the permissible range
0x8107 33031
Bypass time parameter outside of the permissible range
0x8108 33032
Address in Continuous Mode parameter outside of permissible range
0x8200 33280 Command code unknown
0x8201 33281 The command is not implemented in this device
0x8202 33282 Command not supported in HF applications
0x8203 33283 Command not supported in UHF applications
0x8204 33284 Command for multitag application with automatic tag detection not sup-
ported
0x8205 33285 Command for applications with automatic tag detection not supported
0x8206 33286 Command only supported for applications with automatic tag detection
0x8207 33287 Command not supported for multitag application
0x8208 33288 Command not supported in HF bus mode
0x8209 33289 Length parameter outside of the permissible range
0x820A 33290 Address outside of the permissible range
0x820B 33291 Length and address outside of the permissible range
0x820C 33292 No tag found
0x820D 33293 Timeout
0x820E 33294 Next command not supported in multitag mode
0x820F 33295 Length of the UID outside of the permissible range
0x8210 33296 Length outside of the tag specification
0x8211 33297 Address outside of the tag specification

turck TBEN-RFID Series Specifications

General

Brand	turck
Model	TBEN-RFID Series
Category	Recording Equipment
Language	English