Setting
RFID channels — parameter data
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 88
8.1.2 HF applications — selecting the tag type
In multitag applications select a tag type for executing the read and write commands.
Automatic tag detection is not supported for the read and write commands in multitag
mode.
The tag types that can be selected depends on the firmware of the connected read/write head.
The firmware version of the read/write head can be read with the Read/write head identifica-
tion command.
NOTE
With firmware version of the interface up to 3.3.5.0, tags are only displayed in the
web server, in the associated DTM as well as in the catalog and GSDML files that
were detected by read/write heads with a firmware version up to Vx.90. The tags
shown in the table below can be detected irrespective of this.
If a tag is selected that is not supported by the firmware of the connected read/write head, the
RFID interface outputs the “Length out of tag specification” error.
The tag type does not have to be selected in single tag applications or when executing invent-
ory commands in multitag applications if the read/write head detects the tags automatically.
Tag Firmware status
Read/write head
Firmware status
Interface
Selectable Automatic
detection
possible
Indicated in the
web server, DTM,
GSDML and
catalog files
1: NXP Icode SLIX ≥ Vx.91 ≥ V3.4.1.0 x x x
≥ Vx.91 ≤ V3.3.5.0 x x x
≤ Vx.90 All x x x
2: Fujitsu
MB89R118
≥ Vx.91 ≥ V3.4.1.0 x x x
≥ Vx.91 ≤ V3.3.5.0 x x x
≤ Vx.90 All x x x
3: TI Tag-it
HF-I Plus
≥ Vx.91 ≥ V3.4.1.0 x x x
≥ Vx.91 ≤ V3.3.5.0 x x x
≤ Vx.90 All x x x
4: Infineon
SRF55V02P
≥ Vx.91 ≥ V3.4.1.0 x x x
≥ Vx.91 ≤ V3.3.5.0 x x x
≤ Vx.90 All x x x
5: NXP Icode
SLIX-S
≥ Vx.91 ≥ V3.4.1.0 x x x
≥ Vx.91 ≤ V3.3.5.0 x x x
≤ Vx.90 All x – x
6: Fujitsu
MB89R119
≥ Vx.91 ≥ V3.4.1.0 x x x
≥ Vx.91 ≤ V3.3.5.0 x x x
≤ Vx.90 All x – x
7: TI Tag-it HF-I ≥ Vx.91 ≥ V3.4.1.0 x x x
≥ Vx.91 ≤ V3.3.5.0 x x x
≤ Vx.90 All x – x
8: Infineon
SRF55V10P
≥ Vx.91 ≥ V3.4.1.0 x x x
≥ Vx.91 ≤ V3.3.5.0 x x x
≤ Vx.90 All x – x
To Next Page
Loading...
Need help?
General
