turck TBEN-RFID Series - Evaluating Diagnostics with the DTM

Setting
Testing and parameterizing RFID interfaces via the DTM
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 186
8.10.5 Evaluating diagnostics with the DTM
The diagnostics function of the DTM allows the diagnostics of all channels to be called up.
 Right-click the device in the project tree.
 Click Diagnostics.
 In the central window, select the required channel.
a The process output data is displayed in the window on the right-hand side (example: No
diagnostics available).
Fig.99: Diagnostics function of the DTM