Commissioning
Connecting the device to a Modbus master with CODESYS
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 37
7.2 Connecting the device to a Modbus master with CODESYS
Hardware used
This example uses the following hardware components:
n HF read/write head TN-Q80-H1147
n Turck HMI TX507-P3CV01 (Modbus master)
n TBEN-S2-2RFID-4DXP block module (IP address: 192.168.1.61)
Software used
This example uses the following software:
n CODESYS 3.5.8.1 (available as a free download at www.turck.com)
Requirements
n The programming software has been opened.
n A new project has been created.
n The controller has been added to the project.
To Next Page
Loading...
Need help?
General
