turck TBEN-RFID Series User Manual

Setting
RFID channels — overview of commands
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 131
8.8.12 Command: HF read/write head off
The HF read/write head off command enables HF read/write heads to be switched off until a
write or read command is present. It may be necessary to switch the read/write heads on and
off to save energy or if the devices are fitted very close to one another and the detection ranges
overlap. When a command is executed, the read/write heads are reactivated automatically.
After the command has been executed, the read/write head needs to be switched off again.
See description of the output data, p. [}105].
Request
Loop counter See description of the output data
Command code 0x0040 (hex.), 64 (dec.)
Read/write head address See description of the output data
Length UID/EPC Not required
Start address Not required
Length Not required
Timeout See description of the output data
Write fragment No. 0
Read fragment No. See description of the output data
Write data Not required
See description of the input data, p. [}100].
Response
Loop counter See description of the input data
Response code 0x0040 (hex.), 64 (dec.)
Length Not required
Error code See description of the input data
Tag in
detection range
See description of the input data
Data (bytes) available See description of the input data
Tag counter See description of the input data
Write fragment No. 0
Read fragment No. See description of the input data
Read data Not required

turck TBEN-RFID Series Specifications

General

Brand	turck
Model	TBEN-RFID Series
Category	Recording Equipment
Language	English