Setting
Testing and parameterizing RFID interfaces via the DTM
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 184
8.10.2 Editing parameter data with the DTM — online parameterization
The parameter data can be changed and written to the device via the online parameterization.
Right-click the device in the project tree.
Click Online parameterization.
Fig.95: Online parameterization
Example: Selecting an operating mode
In the Online parameterization window, click the operating mode.
Select the required operating mode from the drop-down menu.
Fig.96: Example — selecting an operation mode
To Next Page
Loading...
Need help?
General
