Operation
HF Applications — firmware update of connected HF read/write heads via the web server
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 260
9.19 HF Applications — firmware update of connected HF read/write heads via the
web server
9.19.1 Prepare the firmware update
NOTE
In order to perform the firmware update via the PC and the web server, the device
and the PC must be on the same IP network and the location of the new firmware
file must be known.
9.19.2 Opening a web server
The web server can either be opened via a web browser or via the Turck Service Tool. The call of
the web server via the Turck Service Tool is described in the section “Adjusting network set-
tings”.
The device is factory set to IP address 192.168.1.254. To open the web server via a web browser,
enter http://129.168.1.254 in the address bar of the web browser.
Status information and network settings are displayed on the home page.
Fig.157: Example: Web server — home page
To Next Page
Loading...
Need help?
General
