turck TBEN-RFID Series - Example: Using Fragmentation in the Web Server - Write

Operation
Use fragmentation
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 216
9.2.2 Example: Using fragmentation in the web server — write
The following example describes the writing of 500 bytes in fragments of 128 bytes each.
 Open the web server of the device.
 Log into the device as administrator.
 Local I/O Ò Parameters Ò Operation mode: Desired channel (here: Set RFID channel
0) to HF extended.
 Save the set operating mode by clicking on Write.
Fig.131: Fragmentation — selecting the operating mode
NOTE
The tag must not leave the detection range of the read/write head during the write
operation.
The write fragment number must always start with 1.