Setting
Setting UHF readers
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 206
8.12.3 Testing UHF readers via the web server
The UHF readers can be tested using the web server via the Application function.
Click UHF RFID CONFIG & DEMO Ò Application.
a The RFID test, the UHF diagnostics and the command builder are provided in the
application area:
– RFID test: If the trigger is set to ON, the RF field is activated and tags can be read.
– UHF diagnostics: The diagrams show the interference frequencies of all channels used.
– Command builder: Use of the command builder is reserved for Turck Support and is
not designed for setting device parameters or device operation.
Fig.122: Web server — RFID application
To Next Page
Loading...