Operation
Use fragmentation
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 210
9.2 Use fragmentation
If more data is read than the set size of the data interface, the fragment counter in the input
data is incremented automatically.
To read more data: increase the fragment counter in the output data.
Repeat the process until the read or write fragment No. in the input data equals 0.
If less data is read than the set size of the data interface, the fragment counter stays at 0.
9.2.1 Example: Using fragmentation in the web server — read
The following example describes the reading of 500 bytes in fragments of 128 bytes each.
Open the web server of the device.
Log into the device as administrator.
Local I/O Ò Parameters Ò Operation mode: Desired channel (here: Set RFID channel
0) to HF extended.
Click Write to save.
Fig.125: Fragmentation — selecting the operating mode
To Next Page
Loading...
Need help?
General
