Troubleshooting
Rectify parameter errors
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 266
10 Troubleshooting
Proceed as follows if the device does not operate as expected:
Exclude environmental interference.
Check the terminals of the device for faults.
Check the device for parameter errors.
A device fault is present if the malfunction continues. In this case, decommission the device and
replace it with a new device of the same type.
10.1 Rectify parameter errors
DXP channels
Error Possible causes Measure
DXP output not
switching
The output is deactivated in the default setting of
the device.
Activate the output function via the
Activate output parameter
(DXP_EN_DO = 1).
To Next Page
Loading...