turck TBEN-RFID Series User Manual

Appendix: flow charts showing the operation of the device
Flow chart: Continuous Mode with interruption before reading data
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 282
15.4 Flow chart: Continuous Mode with interruption before reading data
Set command:
Command Code = 0x0012
„Continous mode active“ = False
Data bytes available = 0
ERROR= TRUE
Error Code
OR
Read-Fragment +1
Yes
No
Done
Idle:
Command Code = 0
Response Code = 0
Response Code = Command Code
Set parameter:
„Length“ := data (bytes) available
Set command:
Command Code := 0x0011
Set command:
Command Code = 0x0010
Set output parameter:
- „Start address“ = 1
(Grouping EPCs for UHF)
- e.g. timeout
Yes
Manual stop Automatic stop
after timeout
Fig.178: Flow chart for Continuous Mode with interruption before reading data

turck TBEN-RFID Series Specifications

General

Brand	turck
Model	TBEN-RFID Series
Category	Recording Equipment
Language	English