Maintenance
Performing a firmware update
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 267
11 Maintenance
Ensure regularly that the plug connections and cables are in good condition.
The devices are maintenance-free, clean dry if required.
11.1 Performing a firmware update
The firmware of the device can be updated via FDT/DTM. The PACTware FDT frame application,
the DTM for the device and the latest firmware can be downloaded free of charge from
www.turck.com.
NOTICE
Interruption of the power supply during the firmware update
Device damage due to faulty firmware update
Do not interrupt the power supply to the device during the firmware update.
Do not reset the power supply during the firmware update.
NOTE
Before updating firmware version ≤3.6.1.0 to version ≥3.7.0.0 the bootloader must
be updated to version ≥10.0.1.0.
Example: Updating the firmware with the PACTware FDT frame application
Launch PACTware.
Right-click HOST PC Ò Add device.
Fig.167: Adding a device in PACTware
To Next Page
Loading...
Need help?
General
