Setting
RFID channels — overview of commands
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 122
See description of the input data, p. [}100].
Response
Loop counter See description of the input data
Response code 0x0008 (hex.), 8 (dec.)
Length Length of the read data
Error code See description of the input data
Tag in
detection range
See description of the input data
Data (bytes) available Increases during command execution
Tag counter See description of the input data
Write fragment No. See description of the input data
Read fragment No. 0
Read data,
Byte 0…MIN (127, set length - 1)
Not required