Setting
Setting RFID interfaces via the web server
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 173
Example: Setting the operation mode for channel 0
In the following example, the operating mode of channel 0 is set to RF extended.
Click Local I/O Ò Parameter in the navigation bar on the left of the screen.
Select the RFID channel (here: RFID channel 0).
Fig.82: Setting parameters in the web server
To Next Page
Loading...