Setting
Setting RFID interfaces with the RFID PC Demo software for Modbus TCP
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 190
Example: executing a read command
In the following example, 16 bytes of a tag are read by a read/write head connected to channel
0 of the interface.
Channel 0 Ò Read/Write Ò Command code: Select the read command via the drop-
down menu (0x0002 Read).
Enter the number of bytes to be read in the Length entry field (here: 16).
Sending a read command: In the Command tab, click the Confirm button.
Fig.104: Setting a read command
To Next Page
Loading...